| 臺大學術典藏 |
2022-06-30T02:06:33Z |
The effect of optical system design for laser micro-hole drilling process
|
Ding C.-F.; Lan Y.-T.; Chien Y.-L.; Young H.-T.; CHIEN-FANG DING |
| 臺大學術典藏 |
2022-06-30T02:06:32Z |
Evaluation of structural properties of AZO conductive films modification using low-temperature ultraviolet laser annealing
|
Ding C.-F.; Hsiao W.-T.; Young H.-T.; CHIEN-FANG DING |
| 臺大學術典藏 |
2022-06-30T02:06:32Z |
Effect on the electro-optical properties of transparent conducting aluminum doped zinc oxide thin films using low temperature ultraviolet laser annealing
|
Ding C.-F.; Hsiao W.-T.; Young H.-T.; CHIEN-FANG DING |
| 臺大學術典藏 |
2022-06-30T02:06:31Z |
Laser-induced backward transfer of conducting aluminum doped zinc oxide to glass for single-step rapid patterning
|
Ding C.-F.; Li L.; Young H.-T.; CHIEN-FANG DING |
| 臺大學術典藏 |
2022-06-30T02:06:30Z |
Anomaly detection neural network with dual auto-encoders GAN and its industrial inspection applications
|
Tang T.-W.; Kuo W.-H.; Lan J.-H.; Ding C.-F.; Hsu H.; Young H.-T.; CHIEN-FANG DING |
| 臺大學術典藏 |
2022-06-30T02:06:29Z |
Investigation of ink modification for aerosol jet printing process on FR-4 substrate
|
Hung K.-Y.; Chang Y.-T.; Chien C.-H.; Ding C.-F.; Tsai M.-C.; Young H.-T.; CHIEN-FANG DING |
| 臺大學術典藏 |
2022-06-30T02:06:28Z |
Enhanced conductivity of the Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) films using pulsed CO2 laser irradiation
|
Ding C.-F.; Lan Y.-T.; Young H.-T.; Hsiao W.-T.; CHIEN-FANG DING |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Developing the smart sorting screw system based on deep learning approaches
|
Lin W.-J;Chen J.-W;Young H.-T;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors
|
Chang Y.-T;Hung K.-Y;Young H.-T;Li K.-M;Chen R.K.; Chang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors
|
Chang Y.-T;Hung K.-Y;Young H.-T;Li K.-M;Chen R.K.; Chang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Developing the smart sorting screw system based on deep learning approaches
|
Lin W.-J;Chen J.-W;Young H.-T;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:42Z |
Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M;Young H.-T.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M; Young H.-T.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:42Z |
Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M;Young H.-T.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M; Young H.-T.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:25:56Z |
Developing the smart sorting screw system based on deep learning approaches
|
Lin W.-J;Chen J.-W;Young H.-T;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:25:56Z |
Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors
|
Chang Y.-T;Hung K.-Y;Young H.-T;Li K.-M;Chen R.K.; Chang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:25:55Z |
Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M;Young H.-T.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M; Young H.-T.; KUAN-MING LI |
| 臺大學術典藏 |
2021-11-22T09:11:40Z |
A Study of Alliance Portfolio Diversity Impact on Firm Performance
|
Huang, C.C; Young, H.T.; Wang, C.H.; Chiang, W.H.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:40Z |
A Novel Non-Enzymatic Electrochemical Glucose Sensor Based on a Simple Lithographic Process
|
Hsu, C.W.; Su, F.C.; Peng, P.Y; Young, H.T.; Yang, Mike; Wang, G.J.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:39Z |
Does the Residual Stress of Backend Grinding Dominate the Warping Problems in Wafer Thinning Process
|
Chen, K.R.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:39Z |
Design of Medical Robotic Navigation System Interface used in Biopsy
|
Chen, C.H.; Xiao, F.R.; Kuo, M.F.; Chiang, P.H.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:39Z |
Condition-based Shaft Faults Diagnosis with Empirical Mode Decomposition Method
|
Lin, W.Y.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:39Z |
A Study of Phenomenon on the Surface of Steel Ablated by Femtosecond Laser
|
Lin, F. F.; Yeng, T.Y.; Chuang, L.C.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:38Z |
Enhancement of Through Silicon VIA Sidewall Quality by Nanosecond Laser Pulses with Chemical Etching Process
|
Tang, C.W.; Tseng, S.C.; Young, H.T.; Li, K.M.; Yang, M.; Liao, H.C.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:38Z |
Improvement of Silicon Substrate Strength by an Application of Semiconductor Metallization Process
|
Chen, Y.J.; Tang, C.W; Young, H.T.; Gou M.H.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:37Z |
Novel Method to Investigate the Critical Depth of Cut of Ground Si Wafer
|
Young, H.T.; Liao, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:37Z |
Modeling on Dressing Effects in Chemical Mechanical Polishing with Diamond Dressers
|
Chen, K.R.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:36Z |
Path Planning for Synchronization of Laser Galvanometric Scanner and Stage Motion System
|
Ding, C.F.; Tu, W.C.; Liu, Z.X.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:36Z |
Oxidation of Stainless Steel Induced by Femtosecond and Nanosecond Laser Ablation: A Comparative Raman Study
|
Lin, F.F.; Young, H.T.; Wang, J.K.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
The Image Quality Effect of Optical Path in Laser Processing System with Dynamic Focus Module
|
Ding, C.F.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
Study on Brain Phantom in Surgical Training
|
Liu, K.T; Xiao, F.R; Young, H.T.; Huang, C.Y.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:35Z |
Robotic Surgical Assistant for Minimally Invasive Cranial Surgery
|
Chen, D.Y; Xiao, F.R; Young, H.T.; Huang, C.Y.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:34Z |
Unveiling Technology Development Through a New Patent Mining Classification Method
|
Huang, C.C; Young, H.T.; Wang, C.H.; Yang, S.C; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:34Z |
The Study of Optimal Parameters on Metal Surgical Guide Tubes Structure Design for Spinal Fusion Surgery
|
Chang, Y.T; Chang, F.Y; Young, H.T.; Yeh, C.H.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:33Z |
AOI Strategies for Defects Identification of Micro-Electro Mechanical System Elements
|
Young, H.T.; Chiou, H.S.; Huang, W.R.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:32Z |
Study on CMP Process of Glass Wafers with SiO2 Based Slurry
|
Chen, C.C.; Young, H.T.; Chiou, C.H.; Xue, M.Y.; Pan C.L.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-08-05T02:37:27Z |
High-performance complementary electrochromic device based on iridium oxide as a counter electrode
|
Ko T.-F;Chen P.-W;Li K.-M;Young H.-T;Chang C.-T;Hsu S.-C.; Ko T.-F; Chen P.-W; Li K.-M; Young H.-T; Chang C.-T; Hsu S.-C.; KUAN-MING LI |
| 臺大學術典藏 |
2020-06-11T06:29:01Z |
Measurement of the speed of light from extraterrestrial sources
|
Wu, J.;Huang, Y.-R.;Tsao, H.-W.;Lee, S.-L.;Chang, S.-T.;Tsay, H.-L.;Young, H.-T.; Wu, J.; Huang, Y.-R.; Tsao, H.-W.; Lee, S.-L.; Chang, S.-T.; Tsay, H.-L.; Young, H.-T.; HEN-WAI TSAO |
| 臺大學術典藏 |
2020-01-13T08:21:21Z |
Enhancement of through silicon via (TSV) sidewall quality by nanosecond laser pulses with chemical etching process
|
KUAN-MING LI; Li, K.-M.; Tang, C.-W.; Young, H.-T. |
| 臺大學術典藏 |
2020-01-13T08:20:22Z |
Allowing for nose radius effects in predicting the chip flow direction and cutting forces in bar turning
|
Young, H.T.; Mathew, P.; Oxley, P.L.B.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:22Z |
Allowing for end cutting edge effects in predicting forces in bar turning with oblique machining conditions
|
Hu, R.S.; Mathew, P.; Oxley, P.L.B.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:22Z |
A fundamental modeling approach for nano-grinding of silicon wafers
|
Young, H. T.; Huang, H. Y.; Yang, Y. J.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:21Z |
Evaluating the micromachining rate of nanosecond laser with thermal analysis
|
Ho, J.-E.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:21Z |
Estimation of dressing effects in chemical mechanical polishing with sorts of diamond dressers
|
Chen, K.-R.; Young, H.-T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:21Z |
Measuring the magnetization of nano ferro-fluid with D.C electromagnetic application
|
Ho, J.-E.; Young, H.T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:20Z |
Online condition-based shaft faults diagnosis with multiscale entropy
|
Pan, Y.-H.; Wang, C.; Lin, W.-Y.; Wang, Y.-H.; Young, H-.T.; Lee, K-T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:20Z |
Development of diagnosis system for machine tool shaft inspection
|
Hsieh, N.-K.; Lin, W.-Y.; Young, H.-T.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:19Z |
Investigation of optimum assembly tolerance for a machine tool spindle
|
Hsieh, N.-K.; Young, H.-T.; Chen, W.-C.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:19Z |
A novel non-enzymatic electrochemical glucose biosensor based on a simple lithographic process
|
Hsu, C.-W.; Su, F.-C.; Peng, P.-Y.; Young, H.-T.; Yang, M.; Wang, G.-J.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:19Z |
A method of comparing the speed of starlight and the speed of light from a terrestrial source
|
Wu, J.; Chang, S.-T.; Tsao, H.-W.; Huang, Y.-R.; Lee, S.-L.; Chang, C.-C.; Lin, W.-C.; Tsay, H.-L.; Wang, Y.-L.; Huang, P.-H.; Hsu, M.-Y.; Hsu, C.-W.; Lin, S.-C.; Hung, Y.-J.; Shiu, Y.-L.; Hsiao, Y.-C.; Chang, J.-Y.; Tsai, D.P.; Huang, T.-M.; Young, H.-T.; Liu, Y.-C.; Chang, C.-M.; Chiang, W.-C.; Huang, J.-Y.; Chen, Y.-H.; HONG-TSU YOUNG |
| 臺大學術典藏 |
2020-01-13T08:20:19Z |
Robust process design towards through-silicon via quality improvement based on Grey-Taguchi method
|
Tang, C.-W.; Chuang, L.-C.; Young, H.-T.; Yang, M.; Liao, H.-C.; HONG-TSU YOUNG |
